Wednesday, May 15, 2013
Sunday, May 12, 2013
LMR with'82 XT Flywheel
LMR got creative this evening a fabricated a special tool to enable him to re-mount the flywheel to 57.9 ft/lbs. The use of an actual piston stop was not required.
Saturday, May 4, 2013
30mm
The MotoBum Yamaha WR250F "Ripper" got a 30mm rise for 1 1/8" bars courtesy of Tusk today. They are shiny and new.
The stuff dreams are made of come really, really, really, cheap from Rocky Mountain ATV/MC.
Upon installation of some fresh ProTaper pillowy-soft grips, I had to cut-off the Anti-Rip Tip (TM) ends. Dirt bikes were made for ripping. Anything that gets in the way of a good rip has to be cut off. So, a crisp X-Acto blade came to the rescue. Ripping has now been authorized.
Motorcycles are safe once safety wire has been applied.
The Ripper is ready to rip.
The stuff dreams are made of come really, really, really, cheap from Rocky Mountain ATV/MC.
Upon installation of some fresh ProTaper pillowy-soft grips, I had to cut-off the Anti-Rip Tip (TM) ends. Dirt bikes were made for ripping. Anything that gets in the way of a good rip has to be cut off. So, a crisp X-Acto blade came to the rescue. Ripping has now been authorized.
Motorcycles are safe once safety wire has been applied.
The Ripper is ready to rip.
Subscribe to:
Posts (Atom)